| 973-674-1700Standoffs, Spacers, Captive, Swage, Male Female Standoffs, Jack Screws, Male Male Standoffs, Handles, Thumb Screws, Thumbscrews, Shoulder Screws, Insulating Washers, Electronic Hardware. | | HomeSearchOrderQuoteCrossCatalogRepsTechnicalTermsDistributorsAbout UsContact Us |
 | Male- FemaleStandoffs
Technical / Engineering Data | | | Male-Female Standoffs Standard e-Catalog | |
| |
| Material / Shape Selection |
| MATERIALS | Choose & write down your
material / shape code.
Go to next step
| SPECIFICATIONS |
| ROUND | SQUARE | HEX |
| Brass | M01 | M02 | M03 | QQ-B- 626
Comp. 22, 1/2 Hard |
| Aluminum | M04 | M05 | M06 | QQ-A- 225a
Comp. 2, T-3 |
| Stainless Steel, 303 | M07 | M08 | M09 | ASTM-A581, ASTM-A582,
QQ-S- 763, Class 303,
Cond. A |
| Carbon Steel | M10 | M11 | M12 | QQ-S- 633, Class 2 |
| Nylon, Natural | M17 | M18 | M19 | MIL-P- 17091B,
Grade 101 |
| Delrin® | M23 | | M25 | LP392-A |
| Stainless Steel, 316 | M29 | | M31 | AMS QQ-S-763,
ASTM A276 |
| Titanium, Grade 2 | M32 | | M34 | ASTM B348 |
| Nylon, Black | M35 | M36 | M37 | ASTM D4066,
ASTM D6779, UL 94V2 |
|
RoHS Compliance Statement  I R.E.A.C.H. Statement I DFARS I WEEE
Conflict-Free Minerals Statement I Harmonized Tariff Codes
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
| |
| Properties for Non- Metallic Materials |
| Properties | Phenolic
Linen Based | Teflon® | Nylon | Lexan®
10%
Glass Filled | Delrin® | Ultem® |
| Flammability Rating | V-1 | UL HB | UL 94V-2 | V-O | UL94HB | V-O |
| Water Absorption (%) 24 hrs. | 0.6 - 0.7 | .02 | 1.5 | 0.15 | 0.25 | 0.25 |
| Dielectric Constant (60 cycles) | 5.2 - 5.3 | 2.1 | 10 | 2.9 | 3.7 | 3.15 |
| Dielectric Strength1/8 thickness (v/mil) | 350 | 400 | 300- 400 | 380 | 500 | N/A |
| Arc Resistance (sec) | 100 | 200 | 140 | 10 | 129 | 120 |
| Tensile Strength (psi) | 6,500- 7,000 | 2,700- 3,100 | 11,200-16,500 | 9,000 | 10,400 | 16,500 |
Heat Resistance
(continuous degrees F) | 250-275 | 550 | 250 | 270 | 250 | 340 |
| Compression Strength (psi) | 201-235 | 700-1,200 | 4,000 -11,000 | 12,500 | 18,000 | 22,000 |
| |
| Plating Selection |
Plating Available On These Materials:
Brass, Aluminum,Stainless Steel &Carbon Steel |
| AVAILABLE PLATING | Choose & write down your
plating code.
Go to next step
| PLATING AVAILABLE
ON THIS MATERIAL | APPLICABLE
SPECIFICATIONS |
| Anodize (Sulphuric)
Dichromate Seal, Yellow/ Green | F01 | Aluminum | Mil-A- 8625F, Type 2 |
| Anodize (Sulphuric) Hot Water Seal,
Clear | F02 | Aluminum | Mil-A- 8625F, Type 2,
Class 1 |
| Anodize (Chromic) Hot Water Seal,
Dark Gray | F03 | Aluminum | Mil-A- 8625F, Type 1 |
| Anodize- Black | F04 | Aluminum | Mil-A- 8625F- Black,
Type 2, Class 2 |
| Anodize- Black High Lustre | F04a | Aluminum | Mil-A- 8625F- Black High
Lustre, Type 2, Class 2 |
| Cadmium Plate, Clear Chromate | F05 | Brass, Carbon Steel | QQ-P- 416, Type 2,
Class 2 |
| Cadmium Plate, Commercial | F05a | Brass, Carbon Steel | |
| Cadmium Plate, Gold Chromate | F06 | Brass, Carbon Steel | QQ-P- 416, Class 2,
Type 2 |
| Cadmium Plate,Olive Drab | F06a | Brass, Carbon Steel | QQ-P- 416, Type 2,
Class 3 |
| Nickel Plate | F07 | Brass, Carbon Steel | QQ-N- 290A,
Class 1, Grade F |
| Chromium Plate (Bright) | F08 | Brass, Carbon Steel | QQ-C- 320B,
Class 1, Type 1 |
| Chromium Plate, Engineering | F08a | Brass, Carbon Steel | QQ-C- 320B,
Class 1, Type 2 |
| Chromium Plate Over Nickel Plate | F08c | Brass, Carbon Steel | Mil-QQ-C- 320,
Over-Mil-QQ-N- 290 |
| Passivate | F09 | Stainless Steel | Mil-F- 14072E (EL)
E 300 |
| Bright Dip | F11 | Aluminum, Brass | |
| Iridite, Clear | F12 | Aluminum | Mil-C- 5541E
Mil-DTL- 5541F |
| Iridite, Gold #14 | F13 | Aluminum | Mil-C- 5541E
Mil-DTL- 5541F |
| Alodine 1200 | F13a | Aluminum | |
| Black Oxide, Brass | F14 | Brass | Mil-F- 495C |
| Black Oxide, Stainless Steel | F15 | Stainless Steel | Mil-C- 13924A, Class 3 |
| No Finish
*even if there is no finish-this code
must be included in part # | F16 | Brass, Aluminum,
Stainless Steel, Carbon Steel
& All Plastics | |
| Hot Tin Dip | F17a | Brass, Carbon Steel | Mil-T- 10727, Type 2 |
Silver Plate | F18 | Brass, Carbon Steel | QQ-S-365- 0.0002- 0.0003 |
| Electro Tin | F19 | Brass, Carbon Steel | Mil-T- 10727, Type 1 |
| Electro Tin 60/40 Solder | F19a | Brass, Carbon Steel | M222-Mil-F- 14072 |
| Zinc Plate .0002 Thick,
Clear Chromate | F21 | Brass, Carbon Steel | ASTM-B- 633, Type 1 |
| Zinc Plate .0002 Thick,
Yellow /Green Chromate | F21a | Brass, Carbon Steel | ASTM-B- 633, Type 2,
(Color Chromate) |
Zinc Plate .0002 Thick,
Black Chromate | F21b | Brass, Carbon Steel | ASTM-B- 633,Type 2,
(Color Chromate) |
| Zinc Plate .0002 Thick, Olive Drab | F21c | Brass, Carbon Steel | ASTM-B- 633, Type 2,
(Color Chromate) |
| Alkali Caustic Etch | F26 | Aluminum | |
| |
| Thread Specifications |
| THREAD SIZE | Choose & write down your
thread number.
Go to next step
| A
EXTERNAL
FULL THREAD | C INTERNAL
FULL THREAD DEPTH | D
STANDARD
DIAMETERS |
| 0- 80 | 080 | 5/32 | 3/16 | 1/8-5/32 |
| 1- 64 | 164 | 5/32 | 3/16 | 1/8-5/32 |
| 1- 72 | 172 | 5/32 | 3/16 | 1/8-5/32 |
| 2- 56 | 256 | 5/32 | 3/16 | 5/32- 3/16-1/4 |
| 2- 64 | 264 | 5/32 | 3/16 | 5/32- 3/16-1/4 |
| 3- 48 | 348 | 3/16 | 1/4 | 3/16-1/4 |
| 3- 56 | 356 | 3/16 | 1/4 | 3/16-1/4 |
| 4- 40 | 440 | 3/16 | 1/4 | 3/16-1/4-5/16 |
| 4- 48 | 448 | 3/16 | 1/4 | 3/16-1/4-5/16 |
| 5- 40 | 540 | 1/4 | 3/8 | 3/16-1/4-5/16 |
| 5- 44 | 544 | 1/4 | 3/8 | 3/16-1/4-5/16 |
| 6- 32 | 632 | 1/4 | 3/8 | 3/16-1/4-5/16-3/8 |
| 6- 40 | 640 | 1/4 | 3/8 | 3/16-1/4-5/16-3/8 |
| 8- 32 | 832 | 3/8 | 7/16 | 1/4-5/16-3/8 |
| 8- 36 | 836 | 3/8 | 7/16 | 1/4-5/16-3/8 |
| 10- 24 | 1024 | 3/8 | 1/2 | 1/4-5/16-3/8 |
| 10- 32 | 1032 | 3/8 | 1/2 | 1/4-5/16-3/8 |
| 12- 24 | 1224 | 1/2 | 9/16 | 5/16-3/8 |
| 1/4- 20 | 1420 | 1/2 | 9/16 | 3/8-1/2 |
| 1/4- 28 | 1428 | 1/2 | 9/16 | 3/8-1/2 |
| 5/16- 18 | 51618 | 9/16 | 9/16 | 1/2 |
| 5/16- 24 | 51624 | 9/16 | 9/16 | 1/2 |
| 3/8- 16 | 3816 | 5/8 | 5/8 | 1/2 |
| 3/8- 24 | 3824 | 5/8 | 5/8 | 1/2 |
| |
| Internal Thread Depth- Blind Holes |
| | Contact our sales department for internal
thread depth when the body length
is smaller than the standard internal thread depth |
| THREAD SIZE | STANDARD THREAD DEPTH | BODY LENGTH | *TAP DEPTH RANGE |
| 0- 80 | 3/16 | .125 / .218 | .060 / .125 |
| 1- 64 | 3/16 | .125 / .218 | .060 / .125 |
| 1- 72 | 3/16 | .125 / .218 | .060 / .125 |
| 2- 56 | 3/16 | .125 / .218 | .060 / .125 |
| 2- 64 | 3/16 | .125 / .218 | .060 / .125 |
| 3- 48 | 1/4 | .125 / .343 | .060 / .281 |
| 3- 56 | 1/4 | .125 / .343 | .060 / .281 |
| 4- 40 | 1/4 | .125 / .343 | .060 / .281 |
| 4- 48 | 1/4 | .125 / .343 | .060 / .281 |
| 5- 40 | 3/8 | .125 / .437 | .060 / .378 |
| 5- 44 | 3/8 | .125 / .437 | .060 / .378 |
| 6- 32 | 3/8 | .125 / .437 | .060 / .378 |
| 6- 40 | 3/8 | .125 / .437 | .060 / .378 |
| 8- 32 | 7/16 | .187 / .500 | .125 / .437 |
| 8- 36 | 7/16 | .187 / .500 | .125 / .437 |
| 10- 24 | 1/2 | .187 / .562 | .125 / .500 |
| 10- 32 | 1/2 | .187 / .562 | .125 / .500 |
| 12- 24 | 1/2 | .187 / .562 | .125 / .500 |
| 1/4- 20 | 9/16 | .250 / .625 | .187 / .562 |
| 1/4- 28 | 9/16 | .250 / .625 | .187 / .562 |
| 5/16- 18 | 9/16 | .250 / .625 | .187 / .562 |
| 5/16- 24 | 9/16 | .250 / .625 | .187 / .562 |
| 3/8- 16 | 5/8 | .500 / .687 | .437 / .625 |
| 3/8- 24 | 5/8 | .500 / .687 | .437 / .625 |
|
|
| Thread Locking Products Codes |
Choose & write down your
OPTIONAL thread locking code.
Go back to
| THREAD LOCKING PRODUCTS |
| PH | ND® PATCH |
| RP | ND® 360° RING-PATCH |
| PL | ND®PELL-IT |
| MS | ND®MICROSPHERES |
| VT | ND®VIBRA-TITE |
| ST | ND®STRIP-THREAD |
| More Info on ND® Thread Locking Products |
If external and internal threads are different,
please specify as follows: 1421- M04- F02- 632 I- 832 E
I = internal thread, E = external thread.
TOLERANCES:
B- Length up to 4" ± .005 / 4" to 6" ± .008 / over 6" ± .010
C- Length will be adjusted where B dimensions
will not permit full thread depth
Diameter: Standard commercial bar stock tolerances.
*No undercut Nylon & Delrin® For Modified Parts or Engineering Assistance:
Unicorp offers your firm engineering and design services for customized or
modified parts at no additional charge. Please call our Engineering Department.
UNICORP, MFR. IDENT. Code No. 04729 |
| Phone:973-674-1700Toll Free:1-800-526-1389Fax:973-674-3803 |
UNICORP is a leader in manufacturing stock and custom
electronic hardware, handles and precision fasteners used by leading companies
in nearly every industry since 1971. 291 Cleveland St, Orange, New Jersey 07050USA
Mailing Address:P.O. Box 280, Orange, New Jersey 07051-0280USA Feedback I Legal Notice I CopyrightI Services I Jobs I Contact Us I Email Us I Privacy Statement
Copyright©2020, Unicorp Inc.,unicorpinc.com or its affiliates
|
